#Turnout areas marked on a two lane road how to
#Turnout areas marked on a two lane road drivers

(e) When the roadway is not of sufficient width. (d) Upon a roadway restricted to one-way traffic. (c) When the right half of a roadway is closed to traffic under construction or repair. (b) When placing a vehicle in a lawful position for, and when the vehicle is lawfully making, a left turn. (a) When overtaking and passing another vehicle proceeding in the same direction under the rules governing that movement. Upon all highways, a vehicle shall be driven upon the right half of the roadway, except as follows: (8464)

DRIVING, OVERTAKING, AND PASSING (8462) (1-click HTML) Article 1. DRIVING, OVERTAKING, AND PASSING CHAPTER 3.

#Turnout areas marked on a two lane road drivers

Drivers moving in either direction may use the center lane for making left turns only.CHAPTER 3. The specially marked center turn lane is intended for slowing down and for sheltering turning vehicles and may not be used for passing.ĭrivers from either direction may use the center lane for left turns. Two-way roadway with a center lane for left turns in either direction of travel. The lane marking arrow, in the center lane in the diagram below, indicates that traffic in this lane can be reversed in accordance with local traffic controls due to “rush hour” traffic or other special traffic conditions.ĭrivers from either direction may use the center lane for left turns. It is unlawful to park in or drive through areas that have pavement markings indicating fire lanes or safety zones. Curbs are often marked yellow in no parking zones near fire hydrants or intersections. A single yellow line marks the left edge of all divided or one-way roadways. Symbols such as arrows are in white also. Stop lines, crosswalks and parking spaces are also marked by white lines. These pavement markings are used along with special lane signals and other signs and symbols.Ī solid white line marks the edge of the pavement on most roads. The direction of traffic is normally reversed at set times each day. Some highways have reversible traffic lanes to help handle rush-hour traffic. If your lane is marked with both a curved and straight arrow, you may either turn or go straight. If you are in a lane marked with a curved arrow and the word ONLY, you must turn in the direction of the arrow. Arrows are often used with the white lines to show which turn may be made from the lane. Solid white lines are used for turn lanes and to discourage lane changes near intersections. Crossing a double solid line is prohibited. You may travel in the same direction on both sides of this line, but you should not cross the line unless you must do so to avoid a hazard.Ī double sold white line separates two lanes of traffic going in the same direction. Once you have signaled, and if it is safe to do so, you may cross this line when changing lanes.Ī solid white line marks the right edge of the roadway or separates lanes of traffic moving in the same direction. Single white lines may also mark the right edge of the pavement.Ī broken white line separates two lanes traveling in the same direction. White lane lines separate lanes of traffic moving in the same direction. You may not cross these lines unless turning left when it is safe to do so.

If the broken line is closer to you, you can cross the broken line only to pass another vehicle and only when it is safe to do so.ĭouble solid yellow lines prohibit vehicles moving in either direction from crossing the lines. When passing, you may cross this line temporarily when it is safe to do so.ĭouble Yellow Lines: One Solid, One BrokenĪ solid yellow line to the right of a broken yellow center line means passing or crossing is prohibited in that lane, except when turning left. Stay to the right of the line, unless you are passing a vehicle in front of you. broken yellow lineĪ broken yellow line separates lanes of traffic moving in opposite directions. Single yellow lines may also mark the left edge of the pavement on divided highways and one-way streets. Yellow lane lines separate lanes of traffic moving in opposite directions. These lines may be solid or broken (long dashes), single or double. White and yellow lines are used along pavement edges and between lanes to keep vehicles in line. You must know what the different lines and colors mean and obey them as you would traffic signs or signals. Lines, symbols and words are often painted on a roadway to help direct drivers and control traffic flow. Topics Addressed include: Pavement Markings Florida Drivers Handbook - Pavement Markings A Double Yellow Line for example tells you that you cannot pass.

#Turnout areas marked on a two lane road how to

Their Color and whether they are solid or broken tell you how to drive in that situation and what you can and cannot do. To drive safely in Florida you must understand what the different lines on the road mean. Double Yellow Lines, White Lines, Solid and Broken Lines